Any ideas of making your own chastity belt?

Thats a pretty good question. I would have to say that the answer would be no. You would have to provide a very strong material for a cage that could be provided with a lock. The lock itself would be easy enough, but the rest is debatable.

I'd also say it's a pretty good question, and the answer is yes.

It's quite a bit of work, but can be done fairly easily enough.

You need:

1. A drill
2. A 90-degree J-Bend of PVC (any hardware store will have)
3. A measurement for the cock in question.
4. An endcap fitting the PVC J-bend
5. A bottle of gorilla glue
6. A pack of Zip-Ties
7. A patch of faux fur and some needles/thread.
8. A tight fitting cock ring (optional)
9. A few beads (optional)

The first thing you do is measure your cock and make certain to buy a J-Bend that will fit over it. Usually 1-1.5 inch diameters work.

After that, you drill 6-9 holes in the end cap and glue it in one end of the J-bend. You want gorilla glue all around the edges and all the way down because when it dries it foams up and makes certain to fill every crack so no urine will be left behind. It will take a day to dry, but you'll never get it undone, so make certain you have it the way you want.

While it's drying, make faux fur coverings for the cable/zip ties. This is important because they'll be in constant contact with your skin.

Now that you've dried the assembly, put 4-6 holes around the end that will be in contact with the base of your cock. These will serve as attachment points.

Construction is done.

To wear your new chastity belt, simply slip the cock ring on while you are soft. Then slip the fur coverings over your zip ties, and zip tie it tightly at all of the tie down points to the cock ring. Make certain your balls are sandwiched between the ring and the cage. If you don't have a cock ring, you can easily make one by tightening a fur covered zip tie around your cock and balls.

Note: Some people experience pinching because their packages are larger than others. To prevent this, thread your zip ties through beads between the ring and the cage. This will space it far enough out not to pinch or hurt you during wear. You should flush the tube with squirts of water after every urination, and take it off and clean it once a week.

-M

Wow, very nice guide, AlienNindsInc. Now anybode could craft his/her belt at home

good

wow wondeful arrangement....... i will surely try this...

Any pics of a completed project (not of person, of the device)?

caged for my woman

I built one like the blue cage listed here http://www.chastity-uk.co.uk/home_made.htm The only exception is that i used chain from wal-mart to make a belt like used on a strap on with padlock to hold it in place. i used the heavy wire that they sell at wal-mart also. I found something to bend circles around and used solder to attach it all together and dipped it in liquid tape. I might need to add a rubber pice behind to reduce pinching just trying it out now will keep you posted

slaveboy82 said:

I built one like the blue cage listed here http://www.chastity-uk.co.uk/home_made.htm The only exception is that i used chain from wal-mart to make a belt like used on a strap on with padlock to hold it in place. i used the heavy wire that they sell at wal-mart also. I found something to bend circles around and used solder to attach it all together and dipped it in liquid tape. I might need to add a rubber pice behind to reduce pinching just trying it out now will keep you posted

Click to expand...

I have decided that it needed shrink tube over the chain. other than that it works great. cant get out even if i had to will try to get picts if my queen will let me.

slaveboy82 said:

I have decided that it needed shrink tube over the chain. other than that it works great. cant get out even if i had to will try to get picts if my queen will let me.

Click to expand...

here are picts that i took of it hope this helps. the lower chains go around to the back. the upper chain is the waist chain which attaches to the cage with a pad lock.

These are some great ideas....I think I know what I am doing today for a project...I'll be locked in snug by night fall.

U know, I actually successfully built a rather effective one in my teens.

First, i got a regular belt, a cardboard tube, some string, and that's it!

The cardboard tube is actually a toliet roll.

Steps:

1) Poke/Punch 3 holes on the tube, one on the top, and 2 on the bottom, on opposite
sides. That's two holes in front and one on the bottom.

2) I put on my belt around my waist tight enough for no-movement but not
uncomfortable.

3) Using a shorter string, i tied a knot at one end and threaded it through the bottom
hole. I then looped it around my belt and put it into the top hole, finishing off with a
knot to keep it in place.

4) With a longer string, i knotted it off at one end and threaded it through the bottom
hole. I then pulled it down between my legs so my penis was forced downwards and
looped it once around my leg. One leg only. For two legs, u need to make two bottom
behind loops. After looping it, i tied the other end to the shorter string.

Functions:
Belt: Obvious really
Tube: House the penis
Short string: Hold the tube up in case of an un-erection
Long String around legs: Keep the tube down

Materials may vary.

This is rather effective, as i wore it the whole day and nobody noticed.

very temporary but

A quite fun male chastity device that's temporary is to simply super glue the male slaves penis as much as you decide will be fun. It can be glued back between his legs so that it's pointing out the the back meaning it is absolutely impossible for him to pee standing up for a day or two and absolutely impossible to to get a hard on. Then the fun can begin by teasing him and making him try to get hard when he can't, possibly take him to a strip bar even or watch porn with you, something like that. A strip bar is embarrassing too since he will have to pee sitting down all night. Also a tricky thing for him is to go for a long drive with friends so he can't pee anywhere he wants.

Yeah, uhh, superglue might cause unwanted reactions to the skin, not to mention that the victims have to be immobile while it's drying

Hi tensile wire

make a hi tensile wire tapered spring to suit your size flaccid fit to a cock ring with 2 padlocks top and bottom use a chain from tip under your balls to the bottom of the ring