Wire tit BondageWire tit bondage use thin wire to tie a band around base of each tit pulling it very tight go around around each tit a few times making even more tighter then twist wire and cut wire with a wire cutters.
Make more bands around the tits tying tightly leaving space between wire bands tighten each band so it cut into the tits
Depending on how large the tits are, you can tie the tits with a ½ inch space between the bands of wires and do the same to the other tit.
You may get 5 to 8 wire bands around each tit.
Now take another strand of wire and tie the wire at the bands base of each tit now bring up over each tit make sure the wire goes under each band and all the way down between the tits to the base do the other tit, use 4 to 5 wires up and over each tit. Take middle 2 wires and wrap around the nipples and tie. Push the wires under the bands and bring to base of the tits do the same to the other tit then tie the wire at the band at the base of the tits
You can tie many more strands of wire up and down over the front of the tits.
You can tighten the wire with a needle nose Appliers then bend the sharp edge of the wire into tits so it stick in the tits.
Once all the wire bands are in place you can tighten them even more by grabbing the wire in the jaws of the Appliers and twisting it more to tighten the wires more.
